Powering future

Author: admin

Visitor’s Guide to Tampa, Florida, USA

The city of Tampa is located on the western coast of the state of Florida in the United States.

With a thriving commercial port and many waterfront areas, Tampa is also close

to several notable beaches, such as Clearwater and St. Pete. Located on the other side

from St. Petersburg and with easy access to Orlando, the city has a lot to offer

visitors, including many historical sites, family attractions, and major sports venues.

Tampa currently has a population of over 300,000 and covers over 110

square miles / 285 square kilometers.

Tampa also has a lot of shopping centers, along with restaurants, bars

and a healthy nightlife. Much of city life is centered in the city center,

It contains the Port of Tampa and the Waterfront District. With two universities,

many entertainment venues and the prominent Tampa Bay Center for the Performing Arts,

the city has earned a reputation as the cultural center of Florida.

Tourism in Tampa:

Tourist attractions in Tampa are extremely impressive, with many magnificent beaches.

nearby, making Tampa the perfect vacation destination. Facilities include imposing

landmarks and monuments, museums and art galleries, many places of interest and

family attractions, recreational activities and a number of large parks and

gardens. Top attractions include Busch Gardens, which is one of the best themed

parks throughout Florida, with exciting attractions combined with a vast zoo.

Also worth visiting in Tampa are the Florida Aquarium, Dinosaur World, Weeki

Wachee Springs, the extremely historic Sacred Heart Catholic Church and the

Raymond James Stadium, which regularly hosts major professional soccer games

and it’s the home of the Tampa Bay Buccaneers. Throughout the year the city

regularly hosts many exciting festivals, including the extremely popular

Fiesta del Pirata de la Gasparilla, held every year during the month of January and always attracts

large crowds.

Tampa Transportation:

Around Tampa, public transportation is well organized and the city is easily accessible via

highway, with nearby highways and interstates. Greyhound buses operate inside

Tampa and travel to several Florida cities, including Orlando and Miami. Other

Popular modes of transportation include Amtrak trains, city center trams, and taxis,

which generally must be reserved in advance.

Tampa International Airport (TPA) is located about seven miles from the city.

center and is an important transportation hub, considered one of the most

efficient airports. With many passengers arriving each day, the Tampa airport offers a

variety of convenient ground transportation such as shuttle buses, taxis, and car rentals


Hotels in Tampa:

Being a popular and sunny seaside town, with many exceptional attractions, it comes

It’s no wonder Tampa offers a variety of hotels, motels, bed and breakfasts, and

affordable accommodation. Some of the most popular hotels in the city may be

is located in the heart of the downtown district, close to facilities such as shops and

restaurants. In addition, several beachfront hotels in Tampa offer exceptional

views and are extremely desirable, although hotel rates often come at a premium,

particularly during the high season, which is from January to April. Weekend and

Summer rates are usually low and this is a good time to find discounts.

Tampa Restaurants:

Tampa has a large number of restaurants, which are readily available and cater to all

palate. Restaurants, cafes and bars have developed enormously in recent years, due to

the rapidly expanding tourist trade and the busy seaport. Concentrated around the

central areas of Tampa, in the Hyde Park neighborhood, particularly along the south

Howard Avenue, the boardwalk, and throughout the lively Ybor district, most types

of cuisine can be found in Tampa, including fast food at the large food courts in

shopping malls, traditional Hispanic restaurants and exclusive seafood restaurants

Along the coast.

Shopping in Tampa:

The city offers a diverse shopping destination, with a wide and varied selection of

shops and businesses. The Tampa facility includes many well-known designer outlets.

department stores, upscale boutiques and shopping centers. Popular business areas

include the historical and cultural areas of the city, the Centro Ybor Mall, which is located

in the historic district of Ybor and Old Hyde Park Village in Tampa’s Old Hyde Park

district, where you’ll find a mix of trendy shops, specialty shops, and art

galleries, in a particularly picturesque setting.

Tampa Time:

Tampa has a warm and sunny climate with pleasant ocean breezes.

Temperatures during June to August are at their hottest and can reach highs

around 33 ° C / 91 ° F. Winter and spring are warm seasons and many

people choose to visit the Tampa area at this time of year. December and

January are the coldest months and daytime temperatures remain extremely

temperate and warm, generally around 22 ° C / 72 ° F, although lows of

15 ° C / 59 ° F can be experienced.

Where social media is heading in 2020

Social media trends to follow

A social media marketing strategy is on the minds of many small business owners. And if it’s not in yours, it should be!

Major platforms such as Facebook, Twitter, LinkedIn, and Instagram battle for market shares by adjusting their business models to balance improved profitability for shareholders with improved user experience.

As these platforms develop, the way you use them for your small business must change as well.

Let’s look forward to some ways to promote your business on social media in 2020.


More than 18 months later, the Federal Trade Commission officially ruled that Cambridge Analytica misled Facebook users. The company had collected the personal data from millions of Facebook profiles without people’s consent and then used it for political advertising purposes.

While Cambridge Analytica went bankrupt shortly after the scandal, Facebook continues to work hard to strengthen its data access processes and convince people to trust its new dedicated news platform.

Facebook released Facebook News to a subset of people in the US That means that while you will still see posts from family and friends in your main feed, Facebook News will publish content from a team of journalists (employed by Facebook).

This year, the company is also focusing on cryptocurrencies and establishing its Facebook Pay feature. This could mean that your small business could soon incorporate platform selling into your account.

While the launch of Facebook Watch was not as expected (only 140 million people daily watch the videos and shows, which sounds huge, but does not compare to the 1.6 billion daily assets of the platform in general) . Still, it looks like Facebook will make another attempt in 2020, so let’s see what that means for video marketing.

What do these changes mean for your social media marketing strategy?

We’ll have to wait and see. The more proprietary content the company creates, the more marketers can compete to stay visible.


The company recently announced that it would stop running political ads and is updating its global privacy policy to provide users with more information on what data advertisers might receive.

We also wonder what the company’s vice president of design and research, Dantley Davis, meant by his recent announcement about a number of changes that could come to the platform next year.

How will this affect the way you promote your business on social media?

You might have the ability to limit who retweets your tweet (which I don’t see is a feature that entrepreneurs would use a lot, we love our retweets!), And the ability to tweet something to a specific group based on their interests.

Learn more about how to use Twitter hashtags.


Since its launch in 2003, LinkedIn has become the world’s largest professional networking platform.

Microsoft acquired the platform for $ 26.2 billion in 2016 and, with access to Microsoft resources, we’ve seen up-to-date professional information and more targeted announcements.

We have also seen the reappearance of LinkedIn groups.

A LinkedIn group allows your company to create a discussion board related to your industry. This gives you the opportunity to start a special interest group of like-minded people that is specific to your product, service, and / or expertise.

Groups also provide excellent visibility for your business, as each member that is part of your group will have their logo on their profile. Group owners now also have the ability to post different types of media such as images and videos, and immediate notifications allow for real-time conversations.

Executive Suite has more than 300,000 members and brings together executives with a web series, practical tips and discussion forums.

What do LinkedIn groups mean for your small business?

Hopefully a better way to foster a sense of community, find candidates for job openings, and gain brand visibility, to name a few.


You may recall that Instagram tested likes removal in several countries, including Australia, Japan, Italy, and Ireland. The likes did not disappear; In the US and Canada, you can still see the like count on your own photos and videos, but not on others’ posts.

So where did this come from? Instagram, which is owned by Facebook, has long dealt with people using hacks and solutions. These mainly come from unscrupulous bots and companies that manipulate the application to make themselves or other users appear more popular than they really are. So this is an attempt to make Instagram more authentic.

Instagram says, “We hope this test takes the pressure off how many likes a post will get, so you can focus on sharing the things you love.”

While many entrepreneurs and small businesses are good at this, influencers and video marketing agencies are not.

How can you show companies how popular they are? How will they show commitment?

But for the average small business owner who isn’t buying likes or bottling the system, this could be a good thing.

If your social media marketing strategy includes engaging content, and you’re happy to focus on comments and grow your followers, you’ll be fine.

While IGTV got off to a slow start, it is now considered one of the biggest social media trends out there. After Instagram announced earlier this year that Instagram would allow one-minute previews of IGTV videos on Instagram’s main feed, users (and businesses) started to take notice.

Unlike your other Instagram videos, IGTV videos can be 10-60 minutes long. This offers a great video marketing opportunity for interviews, behind-the-scenes features, and much more.

Since we can now add landscape oriented videos as well, I have been adding my Business Edge Show videos which have had a lot of traction.

These are just a few of the changes you can expect to see across major platforms this year. I’m sure there will be many more as the year goes on, as things are always changing!

To effectively promote your business on social media in 2020, it is essential not only to understand social media trends, but also to adopt them.

If you find it challenging to stay on top of social media, consider hiring an agency that can create strategies that are specific to your social media needs and goals so that you can focus on building your business.

How much do you really want it? (Lessons from Shark Tank)

One of my favorite TV shows is Shark Tank on ABC.

Entrepreneurs come and present their business to the panel of “sharks” (investors) and decide if they want to invest and negotiate a deal.

On a recent show, there was a woman who came to introduce her product, which was a cake mix that she created for dogs.

His sales during the four years of his business were low and he spoke about his inability to afford trade shows and other high visibility marketing methods.

QVC’s Lori Greiner began exploring other options, asking if he had tried going to pet stores and just making walk-ins or cold calls.

His answer was that sales were not his strong suit.

One of the sharks, Mavericks owner Mark Cuban, always seems to say something that hits the spot. You can tell that he believes in the PROCESS we go through in life when we really want to achieve something.

When explaining to the woman why was not willing to invest in your company, says this:

“You haven’t felt like your back was against the wall enough to break down your personal barriers. You told us you’re not a salesperson. That tells me you’re not COMMITTED enough to the success of your product to TRY ANYTHING. No I see the possibility of writing a check for someone who finds the EXCUSE instead of finding the OPPORTUNITY. “

Ow !! Ow !! Ow !!

The fact that he allowed his weakness to be an excuse instead of working around it to find a solution cost him a potential investment of $ 50,000 in his business.

She admitted during her exit interview:

“Today I think the sharks saw my greatest weakness, and that is that I allow excuses to get in the way of making my product successful.”

He was able to assimilate the comments and took responsibility for his personal flaws.

I think in the future she will probably take this as a reality check and move on to overcome the excuses and weaknesses that have been holding her back.

It’s easy to hide behind our excuses, but if we are lucky enough, something or someone will come into our lives to make us face the truth so that we can GROW and get closer to our goals.

What personal barrier have you been unwilling to break to achieve your goals?

What idea have you NOT been willing to try simply because the effort required is out of your comfort zone?

If you were standing in front of the panel, what questions do you know someone could ask you to get an EXCUSE for an answer?

Ask yourself the tough questions so you can make adjustments now. So when an opportunity finally presents itself, you will be prepared and you won’t lose your reward!

Take some time to reflect on those questions, write your answer, and challenge yourself!

Are you ready to try something new to move your career, your business, your health, and your life in a new direction? Contact me for a consultation!

Design your kitchen remodel on a budget

Planning a remodel always starts with good intentions: “Let’s update the cracked and chipped linoleum floor in the kitchen,” you say. But then while you’re at it, you think that maybe the walls might need a new coat of paint.

Then you realize that the cabinets don’t match the paint color … and the backsplash needs to be changed too to match the new cabinets … Suddenly everything in your kitchen needs an update and you’re looking More kitchen remodel design tips online and in magazines.

But wait, these kitchen remodel design plans come at a cost. And oh, how quickly they add up. The next thing you realize is that your kitchen remodel project has a budget of tens of thousands of dollars and is growing. How can you cope with the high costs? Here are some affordable kitchen remodel tips and ideas:

Part of the fun of remodeling a kitchen is looking for the kitchen remodel design that inspires you. There are lots of fun kitchen remodel tips online. Create a portfolio full of the designs you like the most. Then try to identify what you like about each photo. Do you like the color scheme? Great, you can easily solve it! Paint is one of the most cost-effective ways to remodel your kitchen. Paint the walls and if possible paint your old cabinets as well. Or if you need new cabinets, decide whether you need to replace the entire cabinet or just the doors. If it’s just the doors, try buying lower-cost cabinet doors. The trade-off is that you probably have to install them yourself, but the advantage is that you can repaint or repaint them however you like.

If your kitchen is missing some color, a simple and cost-effective kitchen remodel design is to repaint the kitchen. You can also install a tile backsplash. Both projects are relatively simple to complete on your own. You can make a bold or subtle change in your kitchen by introducing new colors and patterns.

Most modern kitchens have an island. If your kitchen doesn’t have one, consider incorporating one into your kitchen remodel design. Ready-made models can be purchased for you to build and assemble with simple tools. Or spend some time and create a custom island. An island can be a butcher block top for food prep, a small sink for cleaning, or even a mini dining table for extra seating and storage. A relatively small investment in building an island can generate large resale value benefits.

An inexpensive remodel design may involve changing the decor. Install curtains or blinds on kitchen windows, or swap old curtains for brightly colored linen ones. Hang a clock or framed pictures or pictures on the kitchen walls. They will also reflect light to some extent. Add some houseplants for fresh air and color. Even a few colored plates or trays propped against the wall of a shelf can be an effective, yet inexpensive way to remodel your kitchen.

Look for reclaimed pieces to use in your kitchen remodel design. Wood or plywood planks can be obtained for less by asking a sawmill if they can sell you (or give you away) some things. These can be repainted on new shelves. Ceramic or cracked tiles can be reshaped into a mosaic backsplash, or even artistically inlaid to add a touch of flair to cabinet fronts.

Sometimes a way to give your kitchen a new look is simply a matter of using what you already have. A kitchen remodel design doesn’t have to involve tearing down cabinets or walls. Change the arrangement of items on the countertop and shelves. You can make the old look like new again with a little paint. Color really helps an old kitchen look new and fresh. Look online for cheaper kitchen remodel tips and have fun!

Swapping a V8 for a Toyota MR2: Build Your Own Supercar

Please note: This is the first in a series of articles on this topic.

For many years, I have dreamed of owning an exotic mid-engine supercar. Unfortunately, they remained out of my reach financially. I decided the only way to get one was to build it myself. I’ve always been fascinated by mid-engined sports cars because of their superior handling, braking and traction compared to a front-engined sports car, even those front-engined cars with a rear transaxle, which supposedly have an optimal weight distribution of 50 / fifty. I like to call them “dumbbell cars” because their weight distribution is like a dumbbell: heavy at the ends and light in the middle. This is decidedly suboptimal for acceleration, handling, and braking.

Compare this to a mid-engine car, where if you were to make a dumbbell look like a mid-engine car, the weights would slide toward the center. Now if you want to make the dumbbell, or mid-engined car, turn on its vertical axis (called “yaw” in aeronautical terminology), it will do so much easier and faster. This is because tire traction does not have to overcome the inertia that a front engine / rear transaxle car would have on each end of the car. The result is that the car will be able to change direction faster and with less tire wear. Peak G-forces will also be much higher on a mid-engined car, which means it’s quicker around corners. The traction of the rear wheels during acceleration is higher, since the rear wheels weigh more. Interestingly, there are many “side effect” advantages in mid-engined cars that the automotive press doesn’t mention.

Some examples:

1) The exhaust pipe is usually very short on a mid-engined car (compared to a front-engined car), so the engine has to overcome less “pumping losses” or resistance to the exhaust coming out of the exhaust pipe. This means more power. The exhaust system will also be lighter as there is less. Dumbell cars have no advantage here.

2) The rear brakes do MUCH more braking vs. a front-engined car. When you step on the brakes, the weight is transferred to the front wheels. This means that the rear wheels are unloaded. In front-engined cars, the front brakes make about 80% of the stops. That’s why the disc brakes at the rear took a long time to catch up. They are simply not needed in the rear. A mid-engined car has a LOT more weight (usually around 55-60%) on the rear wheels. When you step on the brakes, the weight is transferred to the front, so when braking, you might get between 50% and 60% at the front. Dumbell cars get some of the help mid-engined cars get, but not as much, because the engine is still in the front and is much heavier than the trans at the rear.

3) the mid-engined car has no driveshaft (unless it’s an AWD car, like the R8 or Veyron) so there is a weight saving here.

Unfortunately, most mid-engine cars are very expensive. Ferrari, Lamborghini, McLaren, Zonda, Koenigsegg, Bugatti, etc. Some of these cars are over a million dollars! Mid-engined cars also tend to be more difficult to work with. Changing the spark plugs of exotic species is an important operation. The McLaren F1 requires removal of the engine to change the spark plugs!

In the realm of affordable mid-engined sports cars, there are the Pontiac Fieros and Toyota MR2s. In each case, the cars came with 4-cylinder engines. The Fieros had V6s too, but those V6s were underpowered, at a whopping 140PS. In 1990, Toyota redesigned the MR2 and also improved the horsepower. Base models had 130 hp and the top-end Turbo was 200 hp, which at the time was quite a lot for a car weighing 2,700 pounds.

The new body was very attractive, much like the Ferrari 348 of the time. The build quality was also superior as it was a Toyota after all. I decided to buy a 1993 Toyota MR2 turbo in 2005 with the intention of making a change from Toyota V6, which up to that point, had been done by many people. Around the same time, I found out that there were a few attempts to install a V8 engine in the older MR2 (Gen 1, 1984-1989 body style, or make 1). There were also attempts to install a Toyota / Lexus V8 engine in an MR2 mark 2. Attempts to convert the V8 into the MR2 mark 2 were not completed and the project owners gave up. The reasons were unclear, but it seemed to stem from the fact that the Toyota V8 was simply too long to fit the car crosswise, even after severely cutting the car in an attempt to make it fit.

As a mechanical engineer who happens to be a mid-engined sports car freak, I was intrigued by the prospect of putting a V8 in my MR2 Mark 2. With a powerful V8 engine, the MR2 would be transformed into a supercar, with supercar performance. . The guys at Fiero have enjoyed swapping V8s in their cars for many years. The Fieros have an advantage over the MR2s in that the engine compartment is wider, allowing for a larger and longer engine, like a V8. All Fieros and MR2s have cross-mounted engines. Another advantage the guys at Fiero have had is that Getrag’s stock transaxle bolts to a late ’80s / early’ 90s Cadillac 4.9L OHV V8. The rear Cadillac Northstar also bolts without an expensive adapter plate machined to measure.

At the end of 2007, a guy in Europe completed another V8 in an MR2 mark 1 (1st generation). The car was insanely fast and would make cookies in no time. What fun! So, I took another look at previous attempts to install a V8 on the MR2 Mark 2. What I realized was that they were trying to “keep it in the family” and use a Toyota or Lexus V8. There really was no valid engineering reason to use this power plant. It did not bolt to any of the MR2 transaxles and it was too long. The used Toyota V8 (engine code 1UZ-FE) is approximately 26 inches long from the crankshaft pulley to the rear face of the engine or the interface of the bell housing. This is the critical dimension. Compare this to stock MR2 engines like the 2.0L 3S-GTE turbo engine which has a critical dimension of 20 inches. This dimension is critical because it fits between the unibody pseudo-frame rails of the MR2 chassis.

I decided to take a different approach. I started searching the internet for a V8 engine that would fit the MR2 chassis, preferably uncut, or possibly with only a small amount of cutting from the MR2 monoblock. My requirements were that it be a V8 with at least 300 horsepower, that it be available, that it cost less than $ 5,000, and that it be short and narrow enough to fit the MR2. I managed to find one. Audi has an interesting habit of making very short V8 engines. They do this because they want to use their Quattro drivetrain, but at the same time, they don’t compromise handling too much. Audi seems to prefer longitudinal engine and transmission arrangements to transverse ones. The Quattro drivetrain involves a driven front axle, which they had to locate behind the engine. If the motor is too long, it puts too much weight in front of that axle, so they make up for it by making a shorter motor. This has the added benefit of allowing Audi to install this engine in smaller cars that were originally intended to have a 4-cylinder power plant. For my purposes, I found the 1991 to early 2000 Audi V8 engines to be about 20.6 inches long in the critical dimension and about 29 inches wide, not including headers or other easily removable items.

I bought a 1997 Audi 4.2L V8 (engine code ABZ) and a transaxle, and started working on my project. Unfortunately, after much trial and error, I finally decided that the Audi V8 was not suitable for this engine change. The problem lay in the fact that the engine was always designed to be longitudinal. In my case, with a transverse layout, the correct size axle had to run along the side of the engine, and Audi didn’t design the engine with that in mind, so there are large portions of the block in the way of that axle. . The starter, oil filter / cooler, and engine mount are in the way on that side as well, however I solved those issues. The nail in the Audi coffin was the adapter plate. I determined that the adapter plate required some of the mounting bolts to be located inside the hood housing of the 6-speed transaxle I was using, making them impossible to tighten. At that point, I decided to change my approach and use a different engine.

Stay tuned for the next article in this series.

The importance of public relations as part of your marketing mix

What is the importance of public relations? Most small businesses don’t invest in public relations (PR); however, as a small business owner, you must commit to a public relations program to grow your business. What is the return on investment for public relations? Building a stronger brand identity will result in increased awareness and credibility for your business and your products or services. Increased awareness will help you gain interest and credibility in the market.

What is a definition of public relations?

Public relations is about using communication tools and strategies to build relationships with various “audiences,” such as the business community, customers, suppliers, the media, levels of government, and more. Traditionally this is done through press releases, radio, television, newspapers, and magazines. However, in today’s online digital environment, social media and social media have become part of an integrated public relations program. Public relations can influence people’s perceptions and opinions.

Your public relations plan should focus on creating awareness and image of your company and its products and services by:

  • Produce stories and articles for the media (both online and offline); Make connections with local media;
  • Monitor relevant media channels (such as social media monitoring) for public comments about your business, your market, and even your competition;
  • Develop a crisis communication plan and manage the crises that arise and threaten the image of your business and / or product;
  • Engaging with the community and target market through special programs and participation in events;
  • Develop a social media plan to connect with social media online (there are more than 300 but the main networks are Facebook, Twitter, LinkedIn); including press releases from social media, blogs, and forums.

Most public relations plans focus on first identifying the challenge, then building the campaign goals, then building the communication tactics and messages, and finally tracking results and performance. review as needed. This work should be ongoing: first one challenge (such as brand recognition), then another challenge (such as brand credibility), then another challenge (such as introducing a new product), and so on.

In today’s digital environment, PR campaigns can be implemented very quickly and the impact of the campaign can also be measured very quickly. Public relations will help you launch social media programs. Learning how to use public relations in your small business is key: Social media and social media provide you with low-cost communication channels, but you still need to learn what to say and how to say it or you can damage your brand identity.

Successful small businesses focus on a combination of public relations, social media, online and offline advertising, direct marketing, and personal selling as part of their marketing efforts to build their brand. Strengthen your marketing plan by adding PR to the plan and making sure to incorporate measures into your campaigns – you need to know what works and what doesn’t to communicate with your market and your audience.

Teen party at casino night

The best way to organize a teen party that stays under control is to provide an activity that fully engages and attracts the kids. That way, they are not interested in doing the things you don’t want them to do. Of course, they need to socialize, but within the parameters of their planned activity. A Teen Casino Night party works and does it well.

Casino games are so much fun and people enjoy playing them, which is why casino nights are so often used as fundraising events. And this applies to both teens and adults. The fact that the theme of a casino night seems very “sophisticated” helps to get the kids involved in the party activities from the beginning.

Card and dice games are not and do not have to be the equivalent of gambling. Make it clear up front in your invitation that “Only fun is allowed, no gambling is allowed.” You can use poker chips to keep track of the score, or your counters can be pennies, M & Ms, matches, anything. Involve the kids even more in your party by encouraging everyone to “Dress for Vegas”; fancy clothes can equate to better behavior in children’s minds.

Borrow plenty of game tables and chairs, but you can have more children than seats to allow for that socialization when there are no games available to play. To keep the dice contained instead of flying to the ground, make some trays of dice using the low cardboard trays from the beer or soda shop. You can paint them, contact paper, or leave them as is. You will need enough cards and dice for each game.

Set up a buffet table to encourage grazing. Make it easy with store-bought frozen meatballs, store-bought or homemade chicken wings with gravy, salad, and / or a 6-foot hero. It doesn’t have to be fancy food, it just looks good with a few dice, jokers and picture cards, and poker chips scattered around the buffet table for a themed decor. Have a large tub of soda and bottled water with ice for the children to drink as needed. Background melodies will keep the mood festive.

In addition to the ever-popular poker and blackjack games, you can find a variety of appropriate and fun dice games online. If you have the room and the budget for it, I highly recommend that you include a game of craps in your nightly casino schedule. A craps table cover can be purchased for $ 20- $ 30, so it’s not out of sight. Craps is by far the most fascinating and complex of the dice games, and many would say it is by far the most fun. If you’ve ever been to a casino, you know there is always more laughter and screaming. It will definitely challenge children to learn to play all the variations contained in a dice game and to think about the different probabilities of each.

And there’s another perk to including a game of craps: You’ll need a dealer to run the table who understands the game, and no teenage guest will want to stick with that job all night. So your dealer must be an adult, who then becomes an adult presence in the room. And this is good. There is plenty of help online to learn how to play the game for your dealer to get up to speed so he or she can, in turn, teach the kids and run the game.

A casino party is not difficult to hold and everyone will have a lot of fun. Games will keep teens busy competing to do well and do better than the next boy (or girl). You can end the night with a silly prize or two for the night’s ‘big winners’. While teens are harder to please and play games than younger kids, it CAN be done, and casino games will. The more engaged they are, the less likely your teen gathering is to get out of hand and turn into activities you don’t want to happen.

Buying your copper sink: useful information and tips

Selecting to use the kitchen or bathroom sink is easy. There were only a few large companies that sold ceramic, enameled steel, cast iron, and stainless steel sinks. In the last decade, there has been an explosion of new products in the sink category and a growing demand for handmade and custom work. There have been several “new” sink media that have gained acceptance recently: glass, various stones, brass, copper, and even wood. This article will focus on copper sinks and what to look for before making your purchase.

Copper is the oldest metal in man, dating back more than 10,000 years. Its use in the home in modern times ranges from copper tubing in your plumbing system to some of the best kitchen gadgets available. Restaurateurs, hoteliers, and interior decorators view copper and brass as naturally attractive metals that make a statement of quality, comfort, and beauty. It’s no wonder that copper has also become a popular material for kitchen, bathroom, and bar sinks.

Copper artisans abound throughout the world, yet artisans who have earned a reputation for making sinks have focused primarily on India, Mexico, and the United States. Most stores that make “handmade” copper sinks are small, and the methods used to build sinks date back centuries. The term “hand hammered” has recently become synonymous with Mexican sinks. This term refers to the original ancient techniques that artisans have been using for centuries in this area. The copper sheets are literally hammered into shape and hand finished.

The results are somewhat rustic, but truly unique and one-of-a-kind. Copper sinks in the United States are made using similar techniques, but are more often “smooth” rather than “hammered.” American copper craftsmen are dominated by shops doing custom work primarily for commercial projects like restaurants. You can see examples of all these sinks at Sinks Gallery. They specialize in handcrafted sinks and have one of the largest selections of copper sinks available, as well as sinks of all different mediums, including glass, ceramic, various stone, and even wood.

There are three main differentiators that determine quality: the construction technique, the thickness of the copper, and the company you are buying from. Construction quality is made up of several factors: how the corners are constructed, welding technique, and proper dimensions to facilitate installation. The quality can vary even when considering sinks made in the same city, like many of the sinks in Mexico. The buyer should make sure that they are buying from a legitimate company that knows the product and is not selling “seconds”. In the world of handmade products, not all sinks are created equal, and often the same store sells two or more quality levels (ie “firsts” and “seconds”).

Copper begins in sheets of various thicknesses or “gauges.” Metal thickness can also refer to weight per square foot. The thicker the gauge of copper, the lower the number. Most bathroom sinks are made from 20 gauge (thinnest) to 16 gauge (thickest) and most kitchen sinks range from 18 gauge to 14 gauge. When shopping for copper sinks, always ask for the gauge and keep in mind that a heavier gauge sink will cost more, and in many cases well worth it! Light gauge metal can produce a “metallic” sound when the faucet is turned on.

Lastly, consider the store you are shopping from. If a copper sink seems “cheap” in price, there is usually a reason. I have seen many of the copper sinks sold on the most famous “auction site”. All I can say is “buyer beware”, or more specifically “you get what you pay for” … If something goes wrong with your sink or there is a problem when it arrives, you need to make sure that the company you bought will be behind your product. Think carefully about buying internationally. Too often a sink that is received is not as it is represented. A reputable dealer should identify your shipping location, clearly state their warranty and return policy, and be available for inquiries.

I’m a fan of copper sinks. I think they are sturdy but elegant, especially as they age. The rich reflections and hues of the patina process are constantly evolving. A copper finish is a “live finish” and never stops changing color. That said, the evolution of a copper finish is gradual and as it ages it becomes even more attractive. You can greatly reduce this change with the use of wax or even a lacquer product, but personally I like to let the copper evolve. Most of the time, this process results in a smooth brown weathered copper patina. I like to refer to her as the soul of the basins.

Copper sinks often come in various finishes, from a shiny copper finish (like a new penny) to a dark patina (we call ours “Dark Smoke”) and everything in between. The copper finish you choose is a matter of personal taste, but our customers often prefer the more “worn” patinas to avoid the maintenance or uncertainty associated with bright copper. If you want to slow down the patina process, try applying a wax like “Renaissance Wax.” Applied every few months, the wax will provide a barrier between the copper and the environment.

Copper kitchen sinks come in two basic forms: undermount or farmhouse style. The rustic nature of copper sinks fits well with the farmhouse sink style. Sometimes referred to as “front apron” sinks, these sinks come in a variety of sizes, shapes, and different configurations, ie single bowl, double bowl, and even triple bowl. Bathroom sinks are generally available in three styles: bowl (countertop mount), flush mount, or undercounter mount. Typically, the style of the lips determines whether the bathtub sink is recessed or recessed. Be sure to order the right lip style to suit your project. A recent trend in bathroom design is to combine a copper mirror frame with the sink in the same patina. This can help create consistency in the appearance of the décor.

If you have any other questions before purchasing any sink, feel free to call us at Sinks Gallery or Copper Sinks Online – 1-877-320-0800. We will be happy to answer any other questions you may have.

Some reasons why you shouldn’t wear running shoes to lift heavy weights

There are many people who go to the gym to lift weights, but they don’t have the right pair of shoes to do the job. I have seen several weightlifters wear sneakers or running shoes while lifting serious weights. This can be very dangerous and significantly reduce performance.

Most of the people who are going to buy their first pair of “gym shoes” generally tend to look at things like appearance and comfort, as they do not know that there are suitable weightlifting shoes available on the market. Weightlifting shoes are designed for a purpose and running shoes or any other type of footwear should not be used for weightlifting for a number of reasons.

First, weightlifting shoes have hard soles that are designed to improve stability and performance. The stability that hard soled shoes provide is much better compared to running shoes. The reason behind this is that while lifting heavy weights, a lifter must bend the knees and ankles to their maximum limit to lower themselves as low as possible. A great deal of force is produced and all that force can cause the weightlifter to lose balance if he doesn’t have a solid base to stand on, especially when bending that far. Try lifting weights on a trampoline and you will see how difficult it is to stay stable. A hard base is crucial for lifting heavy weights without losing your balance.

Another important thing that a hard sole does is that it helps the weightlifter use all the force produced to lift the weights. A running shoe, which always has a soft sole, will not only cause you to lose your balance, but will also dissipate all force to the ground. This greatly reduces the number of weights a weightlifter can lift, as much of the force that is generated to lift the weights is wasted.

Finally, the raised heel of the weightlifting shoe and its benefits should be discussed. While performing a squat (a technique used by weightlifters to lift heavy weights while standing under the bar), a weightlifter should bend the knees and ankles to their maximum capacity, in addition to keeping both feet supported. on the floor. But keeping both feet flat on the ground while bending that far is quite impossible and instead the feet automatically tend to rest only on the ball and toes. When lifting heavy weights, it is common sense to have both feet flat on the ground. Weightlifting shoes can take care of this due to the raised heel. The raised heel fills the space between the heel of the foot and the ground and allows for maximum stability.

So the next time you’re out shopping for a pair of gym shoes, make sure you’re getting the right weightlifting shoes and not running shoes. You may think it is a waste of money, but once you wear them, you will notice the difference immediately and you will not regret spending on your new weightlifting shoes.

Liberation of women: Are we liberated?

We all talk about women’s education. We all talk about the liberation of women. But how far are we from the real truth? We preach a lot. But do we practice it? Today the world is advancing at a very fast pace. Women are ahead of men in all areas of life.

Academics: From the historian Romila Thapar to the prominent scholar Nabanita Deb Sen to the writer Shobha De, women are everywhere.

Politics: From Mrs. Indira Gandhi to Mrs. Hillary Clinton, politics is always best handled by a lady.

Journalism: each and every major media outlet is run by a lady.

Acting: From India to the United States, women are the best and highest paid today.

Business world: From banker Ms. Chanda Kochhar to Biocon director Kiran Majumdar Shaw, many of the leading business institutions have been led by women.

Malala Yousafjai: The whole discussion will be incomplete if we don’t talk about this girl. Coming from a humble background, she broke all stereotypes to become a Nobel Prize winner. It broke all the stereotypes surrounding the religion of Islam.

Mary Kom – India’s own Mary Kom is today the highest rated boxer in the world. She is a mother, a dedicated wife, and a boxing champion. How many women can achieve that?

Kiran Bedi: A discussion about women will be incomplete if we don’t talk about Kiran Bedi. Perhaps the most decorated and celebrated IPS officer in India. From lawyer Meenakshi Arora to astronaut Kalpana Chawla, the list is endless. The number of beggar children in India is increasing every day. The rate of girls trafficked out of India is increasing every day. In India itself, Madhyapradesh has the highest rape rate in India.

India is the land of academic women. Be it Khana, Gargi or Maitrayee. Can’t we provide basic comforts to women like sanitation, education, hygiene, etc.?

Right to basic education: That all girls have the right to basic education.

Right to basic hygiene: That all girls have the right to basic hygiene.

Marriage at the right age: all girls marry at the right age. That all girls marry after they reach adulthood and only after receiving the proper education.

Prevention of marital rapes: India is a country with the highest number of marital rapes.

A man is born from the womb of a lady. Behind every successful man there is a lady. Can’t we change the rule and prove and show that the reverse is also possible?

But we are still far from the real truth. Women are tortured to this day. India worships the supreme form of the female deity in the form of Mother Durga. We must never forget that. Even Mother Mary is worshiped before Jesus Christ.

Marital rapes do exist. We do not treat our wives, mothers or girlfriends with the same dignity. We do not practice what we preach. At least I do. I hope you don’t make the same mistake.

That behind every successful lady there is a man: Behind every successful man there is a lady. It is time for us to show that behind every successful lady there is a man. Let’s take a step forward. It is time to prove it. There is no shame in it.