Swiroset.com

Powering future

Category Archive : Gaming

Charles’s Tips: How to Save Battery

For those of us who drive or own vehicles, one of the last things we want to experience is a dead battery. But this can be easily avoided.

My family and I purchased our first car in November 1989 and since then we have owned or driven several other vehicles, both gasoline and diesel. What I am about to share works for everyone.

When you’re done driving for the day … and keep in mind … this applies to both new and not-so-new batteries (two years is considered a normal time for a lead / acid battery to normal work fine), DO NOT just turn off the engine and lock the vehicle! With the engine still running, turn off all lights, the radio, and any other electrical appliances: rev the engine to a “fast idle” speed that is just above its normal idle speed, but do not rev it. Keep the engine running at this idle speed for about a minute, then release the throttle and turn the ignition off.

I found this significantly improves battery health while idle and gives you a quicker start the next day. Of course, don’t forget to check the battery cells periodically to make sure the “plates” are covered in electrolyte, unless it’s a maintenance-free battery. If necessary, buy a bottle of “Battery Life” or any other brand of distilled water, which is generally available cheaply at most gas stations, and gently add it to each cell until the dark plates are covered. Do not fill too much.

I’m currently experimenting with a friend’s car that has a maintenance-free battery, and so far that minute of fast idle leaves it with a high charge … between 12.97 and 13.25 volts when I check in the next day.

Hope this little tip helps you greatly in maintaining your battery. Feel free to leave comments or questions. I will appreciate your comments here on the site. I hope to also give some other timely advice if my life is saved, not only in cars, but in other areas of my interest, and that may also be of help to you who will follow my advice. I am a customer-centric type of person and I always try to make sure that others benefit as well.

You can also visit another site that I sometimes use for recreation. This one isn’t about cars, but you may find it entertaining and relaxing – it’s called Eager Zebra Games, and you can easily get to it when you visit the main TripleClicks site listed below.

Happy motorsport everyone!

© Charles O’B. Harewood, 2018

How to tune your bow on paper

In my arrowhead tuning feature, I wrote about the steps required to tune your bow and arrows. In this column, I want to go into more detail about the important paper setting process. This is the quick technique to make the necessary adjustments for laser straight arrow flight.

Throw distance

You need a new take through the paper without external interference. Position the adjustment paper at least 3 feet from the target so there is no chance of the arrow hitting the target before going through the paper. Stand or sit about six feet from the paper when you shoot your bow. Make sure the paper is almost at shoulder height so you can use the normal shooting shape. This is important.

Shooting execution

Since the paper setting is the experiment of both your bow setup and your shooting form, you need to focus on making perfect shots or you will chase your tail, adjusting your bow when your shot type is really the problem. If you take the grip when you fire the trigger or press the trigger, you are likely to see tears even if your bow was installed perfectly. Keep your grip very relaxed throughout the shot and keep constant tracking until the arrow hits the target.

Understanding your tears

After looking at the paper, after shooting, you will see a rounded hole where the field point passed and some kinds of breakage caused by the paddles and the last part of the arrow. The value of the paper setting comes down to your ability to read these tears and make the correct adjustments to your bow and shooting shape to cut them. Your target is around the “bullet” hole with 3 narrow, outward-radiating cuts caused by the paddles. Such a hole results from a true flying arrow, with the neck following directly behind the point. Any difference in this perfect flight will rob you of precision and penetration when hunting.

Tears to the tail

There are 4 reasons why your bow may be shooting a high-tailed arrow. First, the nock point may be too high on the string. Second, the rest may be too low. Third, the arrow paddles may be hitting the rest, causing the arrow to drift upward. And fourth, the bow cam timing may be off, causing the nock to move upward as the string advances.

When a modern compound bow is set up correctly, the arrow will make a 90 degree angle to the string and cross the rest right in the middle of the rest’s mounting hole. You can make small adjustments to the nock point to lower the tail (1⁄8 inch at a time), but don’t make big adjustments. If you have to make major adjustments to see a change in the paper tears, the problem is elsewhere: cam timing or useless contact with the rest.

If the paddles hit the rest, you should see fabrics or marks on one of the paddles. If not, you probably have no contact. But definitely try turning the nock on the arrow to change the orientation of the paddles compared to the rest. That can make a difference. If you can’t remove contact this way, think about a similar test or increase the tension on your trigger wire (on a drop-down rest) to see if that helps by getting the launcher out earlier.

If the tail tear persists after adjusting the cut-off point and removing the contact, the problem is likely related to the arc cam timing. Unfortunately, I don’t have the space here to delve into this topic in depth, but I will cover it in a companion video on the website. Adjusting the cam timing can be complex and unless you know what you are doing you should take your bow to a good archery shop for help.

Tears on the tail

Arrow flight with the tail down is rare and is usually the result of a bow with improper cam timing. It is also possible that your nocking point is too low or your rest is too high, but you can rule this out very quickly simply by moving your nocking point up 1⁄8 to 1/4 inch. Again, if the forecast is camera timing, the best solution is to seek professional help.

Tail tears on the left and tail tears on the right

Sided paper tears can be difficult to remove because they have four possible causes, only two of which are easy to fix. I’ll start with the easy ones. First, move your break to.

The bow if the arrow is torn to the right or out of the bow if it is torn to the left. Sometimes there is a strange interaction with the lateral movement of the rope and the results are meaningless. For that reason, you should also try moving the rest slightly in the opposite direction just to rule out some weird harmonics on the string.

If that doesn’t fix it, consider an arrow that has a different spine, or just a different brand. I have bows that produce good arrow flight with one arrow mark and not others, although they supposedly have the same stiffness. A little experimentation at the archery shop can eliminate a lot of frustration.

Now for the tough solutions. String lateral displacement can cause tears to the left or right that are impossible to fix, unless mechanical changes are made to the bow to ensure that the cams start vertical and remain vertical when the string is pulled. This is a difficult solution for most archery hunting, it is time to visit the professional shop for help. But before you do, make sure your shooting isn’t the cause of these side tears.

If you flinch during the shot, grab the grip when you release, use a grip position that creates torque on the lift, or applies lateral pressure to the rope with your release, you will end up with erratic arrow flight, usually sideways paper rips .

Unfortunately, you have to work on your shooting form with great attention to detail before you can finally tell that the problem is with the bow. This can take weeks, even months, as you work to improve your shape. I’ve been chasing tuning issues for weeks only to finally realize it was something I was doing. Sure, I learned a lot about archery in the process, but I also pulled out a lot of hair!

Tuning a bow is not a dark science, but it does require a bit of effort and, quite possibly, the help of an expert. But the payoff is worth the investment. Watching your arrows fly like lasers is the true magic of archery.

The paper setting accessory

You don’t need a fancy accessory to properly fit the role of your bow. Although many professional stores have elaborate frames dedicated to wrapping paper, you can get by with a simple cardboard box. Cut a hole smaller than a piece of copier paper in the floor of a cardboard box. You can stick the paper over the hole and shoot through the box. Set it on something that is the correct height in front of the target and you are in business.

The other option is even simpler; just buy a Paper Tune-It kit from Premium Review. The kit comes with a pre-made cardboard frame to hold your paper and 10 sheets of tuning paper with pre-printed instructions on how to correct imperfect tears.

‘SteamController procedure entry point could not be located in the STEAM_API DLL’ Fix in Windows 7/8/10

The error “The procedure entry point Steam driver could not be located in the dynamic link library” in Windows 7/8/10 is caused by a corrupt, damaged, or incompatible DLL file.

The bug is synonymous with gaming, but it’s actually present with a host of other apps as well.

The core of the error is that the application in question (in your case Steam) will not be able to load a particular DLL file, causing the system to crash with the error cited in your message. For either variant of this error, the problem comes from having a DLL that does not have the valid functionality required for the application to function properly.

The error will be displayed with the following message:

  • [x].exe: entry point not found
  • The SteamController procedure entry point could not be located in the dynamic link library steam_api.dll

Causes

The problem you are experiencing is the result of calling a DLL, but it does not have a function available from within.

While many people will simply tell you to replace the DLL (which is a valid strategy), there may be deeper issues with Windows or the application that is generating the error. Therefore, to properly resolve the problem, you must be absolutely sure that you have fixed any of the possible errors that may be causing it to show, which may be with Windows or other applications on your system.

The main cause of the error is that another program overwritten the DLL that your application is trying to access.

This may be due to a crash, or the other program could have been designed to do it (in the case of antivirus applications). In either case, the solution is to make sure your underlying system is working properly and then any of the DLLs / settings your computer has is working properly as well. The following should help you correct the various errors you are experiencing.

To be more specific about the steam_api.dll error itself, whenever you use a Steam-enabled game, you must connect to Steam via its “API”. An API is an application programming interface, which is a technical language for a set of hooks / actions that can be invoked by another program, for an independent application.

For example, if you try to load COD and log in with Steam, COD will use the Steam API to log in to your service. Ultimately, what it means is that even though the bug cites Steam, Steam is * not * likely to be the problem. The biggest problem is that your game overwritten the original steam_api.dll with one that didn’t work as well. Either way, the fixes are listed below …

Solution

  1. Reinstall Steam

    The first step is to reinstall Steam

    While I mentioned that Steam is not the problem, the main problem is that steam_api.dll will have been overwritten by your game. As such, you need to make sure that you can get the original version back, which means reinstalling it. Doing this is quick and simple:

    – Press the “Windows” + “R” keys on your keyboard

    – Type “control.exe appwiz.cpl” and press “OK”

    – From the displayed list, select “Steam”, right click and select “Uninstall”

    – Wait for the uninstallation to complete and restart your PC

    After restarting the system, you should be able to download and install the latest version of Steam. To do this, simply head over to the Steam website and download the latest version of the client.

    Download and install it. After doing this, restart your system again and try loading the game. Since reinstallation replaces all Steam files, steam_api.dll should be replaced with the latest version.

  2. Reinstall the affected software

    If you don’t have Steam or the reinstallation doesn’t work, you’ll need to reinstall any of the affected programs.

    The error you are experiencing is usually displayed when you are running a game (which is based on Steam). As such, the best way to ensure that you don’t have corrupted files or settings is to simply reinstall said game. This is done by following these steps:

    – Press the “Windows” + “R” keys on your keyboard

    – Type “control.exe appwiz.cpl” and press “OK”

    – From the displayed list, select the game, right click and select “Uninstall”

    – Wait for the uninstallation to complete and restart your PC

    Once restarted, you will want to try reinstalling the game, preferably by downloading a fresh copy from the internet. After doing this, reboot again and see if the error persists. If so, continue with the next steps.

  3. windows update

    The next step is to update Windows.

    This may sound trivial, but the number of people running dangerously outdated systems is remarkable (check out WannaCry for proof of this). Upgrading Windows is free, and for me at least, there’s no reason you shouldn’t want to. The process is very simple and ensures that any potential bugs within your system are properly resolved …

    Windows 7

    – Click on the “Start” button (bottom left)

    – Click on “Control Panel”

    – Click on “System and Security”

    – Under the “Windows Update” heading, select “Check for updates”.

    – Download and install any updates you find

    Windows 10

    – Right click on the “Start” button (lower left task bar)

    – Select “Settings”

    – Click on “Update and Security”

    – Click on “Check for updates”.

    – Let the system download and install any of the updates it requires

    This may require a reboot.

    And honestly, it probably won’t fix your bug … but it should ensure that the system runs as smoothly as possible (fixing most of the bugs that could be causing it to show up). The next step should resolve the error if it is still showing.

  4. Download and replace steam_api.dll on your system

    Lastly, you’ll want to download and replace steam_api.dll on your system.

    Most tutorials will recommend this up front. While it’s fine, there may be other issues at play, that’s why we tried reinstalling first. It is much better to obtain the “official” file from the software vendor by installing the software, than simply downloading some DLL from the Internet. Since they didn’t work, we’ll have to follow the steps outlined here to replace the DLL on your system:

    – Go to Google and search for the download for “steam_api.dll”

    – There will be a series of sites that will appear at the top (usually dll-files.com or similar)

    – Choose one and then find to download the applicable steam_api.dll for your system (be careful to choose the correct x86 / x64 version)

    – Once you find a good site, download the ZIP to your hard drive

    – Open the ZIP and extract the DLL contained in

    – Right click on the DLL and select “Copy”

    – Go to c: / Windows / System32, right click on a blank space and select “Paste”

    – If the system asks to overwrite an existing file, select “OK”

    – From here, you must press the “Windows” + “R” keys on your keyboard

    – At the “Command Prompt” type the following and press “Enter” after each one: regsvr32 / u steam_api.dll + regsvr32 / I steam_api.dll

    This should display a “success” message. After doing this, restart your system and try playing the game again.

If you are still experiencing the error, it suggests that you have more specific problems with your system.

Since this is an Internet article, I do not have access to any of the potential details that your system may have.

Instead, I’d recommend going to a resource that * yes * gives you the ability to fix any of the issues that may be contributing to additional bugs. To do this, you may want to consider consulting various types of resources …

First of all, you * could * take the system to a local repair technician, but in all honesty, it will cost you money for a service where the guy will basically just do what’s in here. Second, it has several online resources, namely “question / answer” communities and live online support.

For this type of error, it would be best to go to an online support community, either Microsoft Answers or SuperUser, which will be able to provide you with feedback specific to your system.

This can be done by clicking on any of the aforementioned sites, registering for free, and then “asking” a question. Put the full error message as a title and a description of how it loads as a message, and then you should wait (usually around 2/3 hours) for responses. MA’s responses are generally quite generic; Superuser responses are more specific, but completely dependent on the guys who are submitting them (most of whom are not very good).

Stargate Collectibles: 3 must-have things for all Stargate fans

It’s been over ten years that I’ve been hooked on the Stargate (SG) series. Even if I ever missed an episode, I made sure I knew each and every detail before the next one aired. Over the years, I’ve collected some really cool SG-1 and SG Atlantis products to make my friends green with envy. Every SG fan must own three things from the Stargate collectibles to put their madness on display.

Stargate Shirts

If you browse the internet for Stargate jerseys, you will be amazed at the long list of options available. Whether the requirement is a long-sleeved shirt or a T-shirt, the SG logo is present in various colors and sizes. One can flaunt the SG Atlantis cotton shirt with elan or wear the Stargate wormhole logo around it and make a style statement.

Stargate posters

How about you put Stargate posters on your wall and you live in a Stargate fantasy world? Enjoy reliving SG-1 moments with life-size posters of SG-1’s star cast or those depicted as SG-1, Uniting the planets. One can create a SG feel in their room through posters and collectibles on shelves. A gathering of friends in such a decorated room can be really nice.

Stargate Toys

There are also Stargate figures that are not only loved by children, but also serve as decorative items to keep good on shelves. Top-selling Stargate SG-1 action figures featuring top characters including Colonel Mitchell, Vala, Ori Prior, and the limited Black Ops Daniel, make for a perfect toy collection. Kids can explore their own world of Stargate SG-1 through these toys.

Before the new Stargate Universe series kicks off on April 2 of this year, take your time with these Stargate products. Waiting for Stargate to begin can be even more fun when one has the best collectibles to rewind Stargate-filled moments from the past. So, enjoy the Stargate collectibles available before stocks run out, as SGU excitement is picking up pace.

The art of seducing a man: make him find you totally irresistible

There is only one phrase you can say to a man that will make him think about you for days … a way to get his attention without using your body.

Women who understand men know that he can keep coming back without committing you IF you are always available for a booty call. But if you get into his mind, he will keep coming back to you until he commits to you forever.

If you agree with a man’s internal resistance, it will discourage him. The further you move away from his desire to resist, the more attractive he will find you.

For example … if you’ve been chatting with a man for a while and he seems to be interested in you. Add this sentence. Make sure the time is right … when the conversation is going really well. First smile as if you know something and then say jokingly:

“I don’t think you’re ready for this.”

Don’t wait for their comments. Just say it and let it go. Change the subject and act like you never said it.

It will cost you to forget it.

It will be the opposite of how women usually relate to him. Most women hint in one way or another that they want something from a man. When you use the attraction he has to agree with his internal resistance to not want to feel pressure, he will automatically take the pressure off and believe it or not, internally he will want to disagree with you and move towards you.

Suddenly, he will realize that he wants to approach you because you seem irresistible. You are seducing her mind and making her wonder about you. You will want to know how other women want you to commit or want you to fall in love, but you are so comfortable and confident in your own skin.

Recently, I was told that the sexiest thing about me was my attitude. When men in this way, it means that they are totally attracted to you. When you exude this, men want to worship you. This is what men really want from women, what they really crave. They want a woman who is feminine and totally comfortable in her own skin without trying. You will see how men go after a woman who is not that attractive, but she has a way of completely bewitching him. This type of woman knows how to be irresistible to men and you could learn her secrets in a few easy steps.

The Nintendo DS and its storage devices

In today’s world, game consoles are one of the best-selling devices. During 1972, with the introduction of the most important console, the world changed forever! Nintendo, which has been in business since 1977, is one of the leading manufacturers of game consoles in the world. The initial editions of such consoles lacked the portability feature. But with the changing times, portable game consoles were introduced. An excellent example of this type of console is the Nintendo DS, introduced in 2004.

To allow for portability, the DS was designed to weigh much less than normal consoles. Therefore, it could not have any built-in storage device. As a result, external storage devices, called flash memory cards, must be inserted into the device to save content. The device comes with slots for these cards.

There are different types of storage cards, each with its own characteristics.

Different cards need to be used for various DS device models. Of these, R4 is the most used card. It is very popular with Nintendo DS users. R4 cards come in different editions, depending on the edition of the Nintendo DS device. These are the original DS model, the DS Lite model, the DSi XL model, the DSi model plus the latest Nintendo 3DS.

Original R4 DS cards can only be used in original DS and DS Lite models. These are not compatible with other Nintendo DS models including Dsi XL, Dsi, and 3DS. Although these would work with the DS Lite and DS models, it is not desirable to do so. The R4 3DS card is intended for the latest Nintendo console, the 3DS model. This card can also be used for other models, but it should be refrained from such use.

The availability of so many cards probably makes you wonder which one you should use! All of these models look almost the same, but they don’t work with all consoles. It is important to note here that neither of these cards works by itself. Each R4 card requires a suitable micro SD memory card that stores the operating files for its operation. None of the R4 cards would work without a memory card. The larger the storage capacity of a memory card, the more data it can store without the need to delete some of the data already stored. For regular users, a 2GB memory card offers a fairly adequate amount of storage, but professional users will find 4GB or 8GB micro SD cards more suitable.

In case you prefer to have a pre-configured R4 card that already contains the latest software on your memory card, you will need to buy an R4 card that has a memory card, because otherwise you will not be able to include the necessary software, which means you will You have to download and get the latest software for that card.

Classic car history: 1959 Cadillac Series 62

The 1959 Cadillac was the brainchild of designer Harley Earl, who was inspired by American space travel and rockets for his design. The Cadillac 59 was the pinnacle of American car design excess. With tail fins rising 42 inches off the ground, rocket-style taillights, quad headlights and massive chrome bumpers, a body length of over 20 feet, this was the ultimate Cadillac to turn heads. The flamboyant fins of the ’59 are accentuated by its very low profile, which is 3 inches lower than the already low profile of the ’58 model.

Harley Earl was directly responsible for the design of 50 million vehicles and completely changed the look of the American automobile in the 1950s. No man has had such an impact on the shape of American automobile design, and no man has been guilty of so many excesses. of design. Other images were included in its space-themed design such as chrome grilles in the shape of false teeth, dashboards that looked like they belonged to fighter jets with dozens of switches and controls, bumper protrusions known as “Dagmars,” hood ornaments that looked like launchers. missiles.

The 1959 Cadillac is an American icon. You’ll see this year’s model showcased in many 1950s-style diners and restaurants. Hard Rock Café always has a 1959 or 1960 Cadillac in their restaurants. The 59s also starred in many movies, such as in the Clint Eastwood movie “Pink Cadillac.” The Cadillac 59 was a monument to American optimism in the 1950s; in fact it was the “American Dream”. Who wouldn’t love to drive one of these today? Today it will be difficult to find a restored 59 convertible for less than $ 70,000 and many of them sell for more than 100K.

Some of the features of the Cadillac 59 62 Series include power brakes, power steering, automatic transmission, central locking, tinted windows, and some options include headlight dimmers (automatic eye), power-operated windows, seat and trunk adjustment. Some of the other models available include the 8-seater Fleetwood Limo and the Eldorado Biarritz, which is the most valuable ’59 Cadillac.

1959 Cadillac Series 62 Specifications

Engine: 390 ci V8, cast iron head and block

Compression ratio: 10.5: 1

Induction: Carter 4-cylinder carburettor

Maximum power: 325 hp at 4800 rpm

Maximum torque: 435 pound-feet at 3400 rpm

Top speed: 121 mph

0-60 mph: 11 seconds

Transmission: GM TurboHydramatic Automatic

Body / Chassis: Steel body on steel X-frame chassis

Direction: recirculation ball

Wheels and tires: 15-inch diameter steel discs.

Brakes: Drums, 12-inch diameter. (front and back)

Front suspension: coil spring forks and telescopic shock absorbers

Rear suspension: live axle with coil springs and telescopic shock absorbers

Wheelbase: 130 inches

Height: 55.9 inches

Weight: 4885 pounds

Quarter Mile Performance – Who Cares?

Production: 11,130

Price: $ 5000 for Series 62, $ 7400 for Eldorado

As Passover approaches, Jesus Christ approaches Jerusalem and the cross, He tells us why!

In Luke chapter 18 and verse 31, Jesus Christ takes his 12 disciples aside and tells them that we are going up to Jerusalem. Jesus is leading the way, as Passover approaches, but this Passover will be like no other Passover.

Jesus always leads the way, but watch where Jesus is going. Jesus knew what was going to happen. Luke tells us that he resolutely set his face – 9 verse 51 – to go up to Jerusalem. He is determined and he will not deviate. His mind is firmly fixed.

The crisis of the cross looms. It is a fundamental point. The disciples are apprehensive when Jesus explains what he is going to experience. In Mark chapter 10, Jesus tells us WHY – to give His life as a ransom for many – to buy people from their lost fallen sinful condition. Jesus had come to save men from their sins, and Jesus knew that He had come to die. The ‘wise men’ who visited Bethlehem 33 years earlier indicated this, by their gifts.

This distinguishes Jesus Christ from the ‘founder’ of all other religions, or communities of faith, as we hear frequently mentioned today. Jesus Christ is unique.

The purpose of ‘other religions’ is perhaps to help man live a better life and be an example. Jesus’ mission and purpose was to die and be a sacrifice – our Passover Lamb – 1 Corinthians 5 verse 7 – shedding His precious blood to cleanse men from sin – and offer forgiveness – through repentance and faith.

Jesus reminds his men of their priority: Jerusalem and the Cross. If Jesus had lost sight of the Cross for a moment – then his entire ministry would have changed – and it would be the same with us if we ever lose sight of the Cross.

If we ever think that we can do things our way, if we ever think that there are other things more important, if for a moment we think that we should focus on other matters, instead of the Cross of Jesus Christ, then we are in trouble – spiritually. talking.

If we ever think that we can avoid suffering, persecution, and pain, somehow, if we ever think that we can get busy doing things for God and relegate Jesus to an inferior position, then we have been wrong.

If we ever think that we can work things out politically, socially, and financially, and we forget our need for forgiveness and cleansing through the Blood of Jesus Christ, then we have done vital, important, and critical things terribly wrong.

It is good to get to what is at the very heart of our Christian faith.

Jesus Christ holds up the cross before his chosen men, and as he does so, he quotes from Scripture: “All that the prophets wrote about the Son of Man will be fulfilled.” I will be handed over to the Gentiles, that is, to those who were not Jews, to the Romans, they will mock me, they will insult me, they will spit on me, they will scourge me, they will kill me, and Jesus warns them what to expect, and us. also – and three days after all that I will get up – verses 31 to 33.

Jesus makes everything so clear as to what was going to happen. He places the cross before his men, but in the perspective of the resurrection, in the light of his resurrection from the dead. Jesus always spoke specifically about experiencing suffering.
Jesus always spoke about sacrifice before success, tribulation before triumph, death before resurrection, sowing before harvest, and no disciple understood it. Jesus could not have been clearer, clearer, simpler, but a man can only understand Jesus and the Cross when the Father reveals it.
God has to come and open the blind eyes and say “SEE”.

God comes and tells us – Look and see what all this means – My Son dying for you – suffering for you – shedding His Blood to wash you – rising to guide you – to guide you – to give you life – to heal you – to use it – to do May your life be fruitful and profitable. Can you see all that? You may?

We often have to listen to people who say, “I just can’t see that, I just don’t see the meaning of it, I can’t see what all of that will accomplish. I don’t see things the way you see things” and after all, I have my own opinion. “

After being with Jesus for three years, it seemed that so little was being accomplished.
He needed a miracle, and he needs a miracle today, see it clearly, and let’s be aware of that when we talk to people.

Everything was hidden from them. Oh, it was revealed – the miracle happened – but there is a lesson we can learn here for our comfort.

God hides things sometimes – truths can be so dark for a while – and there are times when we want to say, “Why can’t she see that? Why doesn’t she realize that?”

Immediately after this conversation, they approached Jericho, and a blind man was sitting begging. Marcos tells us that his name is Bartimaeus. A noise was heard and Bartimaeus asked what was happening – and some said – Jesus of Nazareth is passing by.

He called Jesus, Son of David, have mercy on me. Those leading this procession gave the blind man a row – Shut up – Sh! Sh! – Don’t make that noise. Were they ashamed? They were annoying? Did they consider Jesus their property, just for themselves, for their procession in Jericho? And why should this beggar occupy Jesus’ precious time?

He would yell for mercy and they would say “Sh! Sh!” He screamed even louder, his sight dependent on his encounter with Jesus, Jesus Christ the King.

It must have been quite loud, whose voice was Jesus going to hear? This was NOT the setting for a cure. Jesus was not upset or concerned about the setting.

How big is your need sometimes? What do you really need from Jesus?
Is there something that only Jesus Christ can give?
Is there anything you need to know Jesus about?

Blind Bartimaeus sowed a seed, sowed a petition, sowed a prayer, and soon, for him, there would be a HARVEST.

To the crowd, he was just a nuisance, a plague, a beggar. Some people may think of it as those times, does it matter? There comes a point where we no longer have to think about what people might think of us.

This was the last time that Jesus would visit Jericho, and for Jesus, Bartimaeus was someone in need, and Jesus always has time for the person in need, who really needs it.

Verse 41 – Jesus asks – What do you want me to do for you? Well Jesus, isn’t that obvious enough? Sometimes Jesus wants us to spell it. Blind Bartimaeus’s need is so desperate that he is neither afraid nor ashamed to go public. When we come in sheer need, Jesus comes in sheer grace, mercy, love, and power.

The Power of the Kingdom flowed. He was given the sight of the Kingdom. The result was Kingdom discipleship.

The Kingdom of God had made its way into Bartimaeus’ life.

Jesus meets the need of this blind man and, in a sense, this blind man could see more than all the others put together. She had faith to see that Jesus could heal her sight.
What a harvest of that prayer seed, that prayer request, that cry of prayer.

Verse 43. He continued to follow Jesus. He continued to praise God. He was open to change. His life would now take on a whole new shape, a different shape.

The people who were present saw the miracle and also praised God.

When people get up and praise God, that is always meaningful, meaningful.

What a harvest, what a miracle, and it all started with someone who sounded like a nuisance, but cried out for mercy for the right Person.

Bartimaeus wanted to see, and he didn’t care what it sounded like, if it would allow him to regain his sight.

He was real, he was desperate, determined and persistent.

When Jesus met his need, he followed Jesus; Jesus would never go down this path again, and when the opportunity arose, Bartimaeus acted immediately.

Another man was about to radically change his life too, my friend Zacchaeus, read on in the next chapter, with an open heart and mind.

As Jesus touches you, blesses you, speaks to you, heals you, forgives you, feeds you, calls you, follow him, all the way, to Calvary and beyond.

Play Queen Poker For Fun and For Money – online gambling

Play Queen Poker

If you are interested to take a look at the world of online gambling, then you have definitely come across Queen poker. Queen poker is an online game provider that has been in business for quite some time. A lot of players are drawn to this game because they find the concept of online gambling very intriguing. This online game is not just based on luck; rather, there are skills that need to be used too. This means that no matter where you are in the world, you will be able to enjoy queen poker no problem.

When you want to take a look at queen joker123 poker, you should always consider your budget first. Most online poker sites offer various options for people who wish to play online poker and you have to choose which one works for you. There are lots of online poker rooms that are offering various kinds of deals. However, each gaming establishment website such asqueen poker 99 has got software from its own trusted suppliers. Therefore, the individual should mention these modifications in his application.

If you are going to play Queen online, you have to remember that you will be required to download the software first before you start playing. There are a lot of gaming websites that can give you various kinds of freebies and gifts, but you have to make sure that you get the latest version of this game. There are a lot of online stores that provide these games along with other accessories. However, you have to ensure that you get the one that suits your playing style.

Play Queen Poker For Fun and For Money – online gambling

Once you have got the queen poker software, you can either play for free or register at a certain online site that offers this game. There are various things that you can do once you have downloaded the program to your computer. You can either sit and play the game at any point of time that you want or take a break and enjoy yourself. This can really help you relax a little. There is no limit to the number of times you can play. The best part about this game is that you can invite your friends over to get the same experience that you are getting.

One more interesting thing that you can do with queen poker is that you can invite your friends to play with you and increase the fun quotient. If you invite a few people, you will get a little competitive boost and this will make you more determined to win against the computer. Playing against real people also helps in increasing the winning quotient. There are a lot of sites where you can play queen poker. Once you get a good grasp of the game, you will realize that this is an addictive game and once you get hooked on to it, you cannot even think of playing against a human being.

The best part about this poker game is that it can be played even when you are sitting at home. If you have the required accessories, you can even get into the action from the comfort of your chair. All you need is a computer that is connected to the Internet and you can start playing your favorite game without any trouble. You can also invite a few people over to your place to get the same thrill as you are experiencing now. If you want to experience all these things with ease, all you need is queen poker and the game would be virtually available to you.

What is a Minecraft server?

You can play Minecraft, the game, as a single player or in a multiplayer environment. If you want to play multiplayer, what you need to do is connect to a computer via the Internet or a local network. The other computer you are connecting to is known as the Minecraft server. Let’s learn more.

The other server you are going to log into is there to help players play with other players. This server may be serving tens of thousands of players at the same time.

If you want to connect to this server, what you need to do is go to the multiplayer settings of the game menu and press the “Add server” option. Then you must give it your desired name as well as the address. Here it is a good idea to use the domain name instead of the IP address, as IP addresses continually change and can cause confusion in the future.

Today, Minecraft allows you to install the software for the Minecraft server. And for this, you don’t need to get a Minecraft account either. But the problem is that most servers run a custom version of the application, like Spigot. This application allows custom plugins that offer various functions. These functions allow games and special permissions.

You can also start your own server in your room. People will play the game on your server. However, if you want people from other parts of the world to play with you, we suggest that you open port 25565.

Here you must be careful. As soon as you go public, your server will be prone to hackers as well. They can enter your server with bad intentions. So be sure to follow the instructions below if you want to be sure.

1. It is better to only allow your friends at first. However, it will also be risky as they can share it with someone they know. But it won’t be as risky as sharing it with everyone.

2. Another way is to create a “whitelist” to allow certain people to connect. No one will be able to connect to your server except the people on the whitelist. So this is an easy way to be sure.

3. You can create regular backups. In fact, you should create backups on a regular basis. This will help you restore everything in the event of a disaster. Ideally, it is best to create backups every hour.

Simply put, if you are interested in playing Minecraft with your friends or other users around the world, we suggest that you follow the advice given in this article. This will help you prepare your server, as well as keep it safe at all times. Afterwards, you don’t want to end up damaging your important gaming data, especially if you’ve set up a large server for thousands of players.